TITEBOND PVC TRIM ADHESIVE AND SEALANT


Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations. It adheres and seals PVC trim to virtually any material including wood, metal, masonry, other PVC trim and more. Ultimate PVC Trim is white in c...

more

Watch Video

Features & Benefits

check_circle
Superior handling and application – Provides a quick, efficient installation
check_circle
2 in 1 formulation – Adheres and seals PVC to a variety of substrates
check_circle
Bonds virtually any material – Unique ability to bond non-porous to non-porous materials
check_circle
VOC-compliant – Exceeds all major green building specifications
check_circle
Weatherproof – Resists the elements and maintains its integrity
check_circle
Extremely durable, yet flexible – Tenacious bond strength that will flex with the PVC
check_circle
Low temperature extrusion – Can be extruded down to 0°F
check_circle
UV-resistant – Will not yellow or crack overtime

Application Guidelines

Application Temperature:
Above 0°F (-18°C)
Preparation:
1. Remove nozzle and cut tip of nub.
2. Puncture foil seal and screw nozzle back onto cartridge.
3. Cut tip on slant for 1/4’’ to 3/8’’ bead and place in cartridge gun.
Application - For Adhering:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion.
2. Apply the adhesive to the PVC board to be installed in either a continuous or spot bead.
3. Adhere materials within 10-20 minutes based on environmental conditions.
4. Press surfaces firmly together with a slight twisting motion.
Note: For longer runs of PVC trim and beadboard, adhering PVC to sub fascia is recommended to assist in expansion and contraction of the PVC.
Application - For Sealing:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion.
2. Force sealant into clean joint. Always apply sealant in bead form.
3. To ensure neat sealant lines, mask areas adjacent to joints. Once sealant is dry to the touch and does not transfer, remove masking tape.
Note: Ensure that initial joint width can accommodate expected substrate movement (±50% movement capability).
Cleanup:
Tools and adhesive may be cleaned with acetone or isopropyl alcohol when uncured. Follow solvent vendor’s precautions. Once cured, adhesive must be scraped from surface.
Painting:
Sealant is intended for exterior use. If used indoors, sealant may need to be painted. In most cases, painting may occur one hour after application with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Air, adhesive and surface temperature should be above 0°F. Not recommended for continuous submersion or use below the waterline. When using on non-porous substrates, mist with water to speed curing.

Physical Properties

Viscosity
102,000 cps.
Solids
98%
Open Time
10-20 minutes
Freeze / Thaw Stability
Not affected by freezing
Shrinkage
None
Odor
Low
VOC
<50 g/L
Storage Life
24 months

Specifications & Certifications

  • ASTM C920 Type S, Grade NS, Class 50, Use NT, M, G and A
  • Federal Specification TT-S-00230C Type II Class A